|
| 30-75hp Tractor Mounted Work width 48-78 cm Peanut Harvester process |
Postado em 27/02/2019 11:29 por yanghmlh123  |
30-75hp Tractor Mounted Work width 48-78 cm Peanut Harvester in use process? To make better use of the device first, you must understand something about these situations.
The equipment should be operated according to the process flow. When feeding peanuts, the peanuts must be filled into the feeding port first, and the feeding should be uniform. It is strictly forbidden to feed hard objects such as stones, wooden blocks and metal objects into the machine during operation to avoid damage to the machine and personal accidents; During the operation, it is strictly forbidden to reach into the feeding port, the fan port, and the exhaust port; the operator should tighten the cuffs when working, and the lesbians should bring a work cap; if they hear abnormal sounds or find faults during operation, they must stop the machine. In case of timely troubleshooting, it is strictly forbidden to carry the disease with the machine; it is strictly forbidden to work with the fruit picker; after the end of the work, there must be professionals to check, adjust and maintain. Such as adding grease, repair welding, etc.; when the picking machine appears to block the drum, should check the amount of feed, peanut dryness, the tightness of the motor triangle, power supply voltage, etc.; when the peanut picker is not clean, adjust the roll The gap between the teeth and the bottom of the screen. When the gap between the hobbing and the bottom of the screen is large, it is easy to pick up the net; when the peanut fruit contains many impurities and the peanut fruit is sucked out, the suction port should be properly adjusted. When the sundries are sucked out, the suction port is raised.
yanghuimin / jiguang |
|
|
|
