DBTools Software - Fóruns

Anonymous

Home » Fóruns » Suggestions and New Features

The most important part is Stainless Steel Threaded Rod (510 visualizações)
The most important part is Stainless Steel Threaded Rod	Postado em 19/05/2017 12:59 por shanhetao6
For the Stainless Steel Threaded Rod , the most important part is the ordinary screw, the pin can be set in the screw melt or both ends of the groove inside. Pins are arranged in accordance with a certain way, but the degree of density there are some differences, the number is not the same. Cylindrical pins can be fitted to the inside of the screw hole, square or diamond-shaped pin is directly formed in the screw on the iron pin above. Thread processing can be done by observing the thread type to determine the quality of the thread in a timely manner to take measures. But should pay attention to the external thread, when the thread crest is not sharp, increase the amount of cut into the knife but will increase the diameter of the thread. The amount of plastic depending on the material may be, when the crest has been sharpened, increase the knife cut The amount of large diameter is proportional to the reduction, according to this feature to properly deal with the amount of thread cut to prevent scrapping. For the general standard thread, are used thread gauge or plug gauge to measure. In the measurement of external thread, if the thread "over the end" ring gauge (regulation) just forward, and "stop" ring gauge (stop) does not move, then the processing of the thread meet the requirements, and vice versa The Measure the internal thread, the use of thread plug gauge, the same method for measurement. Mixing section is generally set in the ordinary screw to the end of the segment to the inside of the slotted structure, its diameter and screw diameter are the same. The trench can be divided into many groups, regardless of which group is the convergence area of ??the material. The material is divided by the groove, the principle and the pin is no different. In addition to the thread gauge or plug gauge measurement can also be measured with other gauges, screw micrometer with a screw diameter and so on. There may be a lot of people do not understand the use of the screw, let us now let you briefly introduce it. Stainless Steel Threaded Rod - http://www.din975.net/ Back Smith / Hangzhou Jipusi Advanced Materails Co., Ltd.
The most important part is Stainless Steel Threaded Rod (510 previews)

Home » Fóruns » Suggestions and New Features